Rail length and finish
The Classic Rail+, also called J-rail, is beautifully designed system available in 2 finishes: white and aluminium. The rail can be cut to size with a metal saw if needed. This rail is an open type which means that the wires are hung on the rail rather than inside it. A blocking device provides extra security to your system by restricting rods removal.
Please note, you will also need an install kit. It consists of 8 plugs and screws, which you need for fitting it on your wall. The only part of installation where a bit of DIY is required is drilling 6 holes per 2m rail. About every 30cm. Put the plugs in, screw the rail on. That’s it. It’s ready for attaching rods or S Hooks with wires.
Classic Rails+ can be installed in a straight line next to each other. No connectors are required. You can have them fitted at any height on a wall all the way to the ceiling. They’re very easy to use. This rail can carry the heaviest artwork and pictures. To allow a maximum load of 100kg per metre, please ensure your wall in sound condition.
- length: 2.0m
- dimensions: 20.0mm x 9.0mm
- finish: white, aluminium
- max. load: 100kg/m
- warranty: 10 years
S Shaped Rod 4mm
Alternatively you may opt in to use rods instead of wires. We offer this rod in white or steel finish. It is round shaped. To hang frames with rods, you will need Sliding Springs. This rod is 2m long. If you require different lengths, do contact us.
U Top Rod 4m
The thinner rod, which has 2mm diameter, can be used with Mcro Grip, Ratchet or Loqqer Hooks. You can place the hooks anywhere along the rod. This rod has a Steel finish. It comes in 2m lengths. If you require 1m length, please contact us.
Blocking Device would be extremely useful when comes to art security. When applied on a rod, it restricts anyone from removing it from the rail. Combining it with anti-theft clamping hooks makes it a complete security solution.
Use with: 4mm rods only
Perlon Wire with Loop
If you prefer to use an S Hook with your Classic Rail Plus, you will need a Perlon Wire with Loop to hang your framed art and pictures. Simply put a hook on rail, loop a wire on it. All done and ready to use. This wire is also available in Steel.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
This hook to be used with 4mm rods only. There are four types of this hook available. Two standard types with maximum load of 40kg or 100kg and two anti-theft types with maximum load of 60kg or 100kg.
A very elegant picture frame hook suitable for hanging heavier wall picture of up to 15kg. This hook is self-locking and simple to adjust in height by pressing it down. Clamping force increases with heavier load.
A self-locking hook with a security mechanism for frames up to 15kg. Adjusting it is easy. Just press the top of the hook. The spring mechanism protects your frames from unintentional unhooking.
An extremely easy to adjust self-locking hook with maximum load capacity of 20kg. Just squeeze it with your fingers to move it along the wire. On release it will lock itself securely in place.
This hook is hape of letter S. The top of this hook finishes in white goes on the rail while the bottom is for hanging looped wires. You can move it along the rail and place it wherever you want.
This hook is to be used with Perlon Slider Wire, which has hexagon hanger on top of it. Just thread the wire through it and hang the hook on the rail. That’s it. We offer this hook in white or steel finish.