Artiteq Click Rail Guide
Versatile wall system. Flexible applications.
Artiteq Click Rail is an excellent picture hanging system that is truly versatile and can be used in many different configurations and hanging applications. It is available in three finishes: white, white primer and brushed aluminium.
The primer version can be painted in a colour of your wall to better blend in or left white as it is. It comes in two lengths, 1.5m and 2.0m. The rail can be cut to size with a metal saw if needed. The installation is very easy and requires a minimum amount of DIY.
The Click Rail System is available in three finishes: white, white primer and brushed aluminium. The primer version can be painted in a colour of your wall to better blend in or left white as it is. It comes in two lengths, 1.5m and 2.0m. The rail can be cut to size with a metal saw if needed.
The Installation Kit consists of 6 wall plugs, screws and clips, which are required for fitting the rail on your wall. The only part of installation where a bit of DIY is required is drilling 6 holes per 2m of rail. About every 40cm. Then put the plugs in, screw the clips in and click the rail on. That’s it.
Click Rails can be installed together in straight line or around corners. For straight line installation, install one of the clips in between rails. For corner installations, you will need a corner connector. The same connector works for inside or outside corners.
Technical information
Length 1.5m, 2.0m
Dimensions 25.0mm x 8.5mm
Finish white, white primer, brushed aluminium
Maximim load 30kg/m
Warranty 10 years