Rail length and finish
The Contour Rail is a very compact picture hanging system. It gets the job done despite its minimal dimensions. You can hang or rearrange pictures and photos are very easy. This rail can also be glued to the wall where drilling is not possible.
Installation is easy
Please note, you will also need an install kit. It consists of plugs, screws and clips, which are required for fitting it on your wall. The only part of installation where a bit of DIY is required is drilling 6 holes per 2m rail. About every 40cm. Due to way this rail is clicked into wall clips, please leave at least 15mm gap from the ceiling.
Contour Rails can be installed next to each other. To do so install one of the clips in between rails. White primer rail can be painted in a colour of your wall or left as it is. It gives you great flexibility if you decide to change your interior design in the future.
- length: 2.0m
- dimensions: 12.5mm x 12.5mm
- finish: white primer, aluminium
- max. load: 20kg/m
- warranty: 10 years
Twister Perlon Wire
The most user-friendly way to hook a wire into the rail: just insert, twist and you’re done. The wire can be clicked anywhere along the rail so you can hang your picture wherever you like. If you change your mind, you can slide it to the left or right.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m, 5m
Perlon Solid Slider
If you are require a system with some level of security, you may opt to install wires that cannot be removed from the rail easily. This wire has to be dis/connected from the side of a rail. Then you can slide a wire along the rail wherever you want.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Twister Perlon Cliq2Fix
Twister wire can be inserted anywhere along the rail. Cliq2Fix eliminate the risk of wire accidentally popping out from the rail during adjusting or changing wall display. It provides extra piece of mind if pictures are frequently changed.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Twister Slim Wire
Slim line is the only non-2mm wire. it has 1mm diameter and must be used with 1mm hooks ONLY. They are an excellent solution for haning light pictures. The maximum weight you can put on a perlon slim wire is 5kg and on a steel slim wire is 10kg.
Lengths: 1.5m, 2m, 3m
Micro Grip Hook
An extremely easy to adjust self-locking hook with maximum load capacity of 20kg. Just squeeze it with your fingers to move it along the wire. On release it will lock itself securely in place.
A screw-locking hook for lighter frames of maximum load capacity of 4kg. It is very easy to use. Loosen the screw to move it along the wire and then tighten the screw to secure it firmly in place.
A very elegant picture frame hook suitable for hanging heavier wall picture of up to 15kg. This hook is self-locking and simple to adjust in height by pressing it down. Clamping force increases with heavier load.
Heavy Brass Hook
A beautifully designed hook for pictures and artwork no heavier than 7kg. To position it along the wire, loosen a screw, move it to a desired height and then tighten a screw so that it stays firmly in place.
This screw-locking hook is perfect for pictures with square hangers at the back of the frame. Its maximum load capacity is 10kg. It is also possible to use two hooks per frame especially for wiser pictures.
Micro Grip Slim
This hook must be used with 1mm wires ONLY. It is extremely easy to adjust and has maximum load capacity of 10kg. Just squeeze it with your fingers to move it along the wire. On release it will lock itself securely in place.