Artiteq Top Rail Guide
A minimalistic ceiling system. A perfect solution
for projects where wall installation is not possible.
Buy Top rail
The Top Rail System is available in three finishes: white, aluminium and black. The rail can be cut to size with a metal saw if needed. Please always ensure that the ceiling is in a good condition to hold the rail firmly in place. Depending on your ceiling structure, you may consider using longer screws and plugs than we provide. The Top Rail has 16 pre-drilled installation holes per 2 meter made for 3.5mm screws. These screws are meant to be fitted tightly to ensure the railholds the maximum advertised weight load.
An Installation Kit consists of 16 screws 3.5mm and plugs, which are required for fitting the system to your ceiling. The only part of installation where a bit of DIY is required is drilling 16 holes per 2 meter rail. About every 12cm/5in. Put the plugs in, screw the rail on. That’s it. You’re done.
Top Rails can be installed next to each other in a straight line. No connectors are required. The screw set in the Installation Kit we provide will match the finish colour of your Top Rail.
Technical information
Length 2.0m (L)
Dimensions 14.3mm (D) x 7.0mm (H)
Finish white, aluminium, black
Maximum load 20kg/m
Warranty 10 years
Choose your preferred wires to go with the Top Rail.
Wires are available in several different lengths.
Picture Hanging Wires
Twister Perlon Wire
The most user-friendly way to hook a wire into the rail: just insert, twist and you’re done. The wire can be clicked anywhere along the rail so you can hang your picture wherever you like. If you change your mind, you can slide it to the left or right.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m, 5m
Perlon Solid Slider
If you require a system with some level of security, you may opt to install wires that cannot be removed from the rail easily. This wire has to be connected from the side of a rail. Then you can slide a wire along the rail wherever you want.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Twister Perlon Cliq2Fix
Twister wire can be inserted anywhere along the rail. Cliq2Fix eliminate the risk of wire accidentally popping out from the rail during adjusting or changing wall display. It provides extra piece of mind if pictures are frequently changed.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Perlon Slider Wire
Perlon Wire allows you to hang your frames the way it is hardly visible on a wall. This wire has a metal slider at the end which offers an optimal movement inside the rail. The wire has a diameter of 2mm and a maximum weight load of 15kg.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Picture Hanging Hooks
Here are the most popular hooks for suspension wires.
Great for your next exciting picture hanging project.
Micro Grip Hook
An extremely easy to adjust self-locking hook with maximum load capacity of 20kg. Just squeeze it with your fingers to move it along the wire. On release it will lock itself securely in place.
Ratchet Hook
A very elegant picture frame hook suitable for hanging heavier wall picture of up to 15kg. This hook is self-locking and simple to adjust in height by pressing it down. Clamping force increases with heavier load.
Loqqer Hook
A self-locking hook with a security mechanism for frames up to 15kg. Adjusting it is easy. Just press the top of the hook. The spring mechanism protects your frames from unintentional unhooking.
Mini Hook
A screw-locking hook for lighter frames of maximum load capacity of 4kg. It is very easy to use. Loosen the screw to move it along the wire and then tighten the screw to secure it firmly in place.
Heavy Brass Hook
A beautifully designed hook for pictures and artwork no heavier than 7kg. To position it along the wire, loosen a screw, move it to a desired height and then tighten a screw so that it stays firmly in place.
Alu Hook
This screw-locking hook is perfect for pictures with square hangers at the back of the frame. Its maximum load capacity is 10kg. It is also possible to use two hooks per frame especially for wiser pictures.