ArtiTeq Up Rail.
An elegant ceiling system. Perfect solution
for projects where wall installation is not an option.
Rail length and finish
The Up Rail System is available in white primer finish. The rail can be cut to size with a metal saw if needed. Please always ensure that the ceiling is in a good state to hold the rail. This rail has a nice round shape which helps blending it with your wall.
Installation process
Please note, you will also need an install kit. It consists of 6 clips, plugs and screws, which are required for fitting it on your ceiling. The only part of installation where a bit of DIY is required is drilling 6 holes per 2m rail. About every 40cm. Put the plugs in, screw the clips on and click the rail into place.
Connecting rails
Up Rails can be installed together in straight line. Use one installation clip to connect two rails by placing it beween two them on a wall. Up Rail can be paint in a colour of your wall.
Technical information
- length: 2.0m
- dimensions: 17.5mm x 12.3mm
- finish: white primer
- max. load: 20kg/m
- warranty: 10 years
Choose your preferred wires to go with the Up Rail.
Wires are 2mm thick and available in several different lengths.
Picture Hanging Wires.
Twister Perlon Wire
The most user-friendly way to hook a wire into the rail: just insert, twist and you’re done. The wire can be clicked anywhere along the rail so you can hang your picture wherever you like. If you change your mind, you can slide it to the left or right.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m, 5m
Perlon Solid Slider
If you are require a system with some level of security, you may opt to install wires that cannot be removed from the rail easily. This wire has to be dis/connected from the side of a rail. Then you can slide a wire along the rail wherever you want.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Twister Perlon Cliq2Fix
Twister wire can be inserted anywhere along the rail. Cliq2Fix eliminate the risk of wire accidentally popping out from the rail during adjusting or changing wall display. It provides extra piece of mind if pictures are frequently changed.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m
Twister Steel Wire
Steel wires give a wall display a bit contemporary look and go nicely with white Up Rail. Twister wire offers an easy way of connecting it to the rail: just insert, twist and you’re done. You can also slide it along the rail easily.
Lengths: 1m, 1.5m, 2m, 2.5m, 3m, 5m
Picture Hanging Hooks.
Here are the most popular hooks for 2mm wires.
Perfect for your next exciting picture hanging project.
Micro Grip Hook
An extremely easy to adjust self-locking hook with maximum load capacity of 20kg. Just squeeze it with your fingers to move it along the wire. On release it will lock itself securely in place.
Ratchet Hook
A very elegant picture frame hook suitable for hanging heavier wall picture of up to 15kg. This hook is self-locking and simple to adjust in height by pressing it down. Clamping force increases with heavier load.
Loqqer Hook
A self-locking hook with a security mechanism for frames up to 15kg. Adjusting it is easy. Just press the top of the hook. The spring mechanism protects your frames from unintentional unhooking.
Mini Hook
A screw-locking hook for lighter frames of maximum load capacity of 4kg. It is very easy to use. Loosen the screw to move it along the wire and then tighten the screw to secure it firmly in place.
Heavy Brass Hook
A beautifully designed hook for pictures and artwork no heavier than 7kg. To position it along the wire, loosen a screw, move it to a desired height and then tighten a screw so that it stays firmly in place.
Alu Hook
This screw-locking hook is perfect for pictures with square hangers at the back of the frame. Its maximum load capacity is 10kg. It is also possible to use two hooks per frame especially for wiser pictures.