Choose your ideal system. In just 3 steps.
Welcome to Picture Hanging Guide
Step 1. Choose the rail.
How do you prefer to install your system?
Based on the type of installation you prefer, below you can choose the rail system that fits your needs. Rails are available in 2m lengths however can be cut to a required size with a metal saw. All rails except Top Rail require three holes per metre to be drilled for installation. There is no other DIY required beyond that point.wall mounted ceiling mounted
Step 2. Choose wires.
What type of wires do you prefer to use?
Wires are available in lengths between 1m and 3m or 5m. If a wire you purchased is too long you can cut the excess off with a sharp knife or coil it behind a picture. Perlon wires are transparent so they tend to nicely blend in with your wall while steel wires are solid grey which in turn gives more contemporary look.Perlon wires Steel wires
Step 3. Choose hooks.
How do you prefer to adjust hooks on a wire?
Self-locking hooks can be adjusted on a wire by pressing or squeezing them between your fingers. On release they lock firmly in position. Screw-locking hooks has a screw which needs to be loosened to adjust a hook on a wire and then tighten back to lock it firmly in place. Hooks have different maximum load capacity.Self-locking Screw-locking