Artiteq Click Rail All-in-One Set
Artiteq Click Rail All-in-One’s is available in three different variations, 2m, 4m and 6m. It includes the rails, installation kits, instruction manual, hanging wires and hooks. One of the most popular and versatile picture hanging systems. Using the Click & Connect clips, mounting the system is fast and easy. Artiteq Click Rail may be mounted beneath a ceiling.
Artiteq Click Rail system is available in two different versions: white and white primer. The decision which one to go for depends what type of finish you are trying to achieve. A rail in white primer has been made ready for painting in a colour of your choice. For example to match the colour of your walls. If you have any queries or require more information, please contact us. We are always happy to help.
Click Rail system is fantastic to put pictures, artwork and photo frames on your wall. It allows you to position wires and hooks at any desired place in the system.
Artiteq Click Rail All–in–One Set (4m) includes
3 x Click Rails (2m)
4 x Perlon Wire with Slider (2.0m)
4 x Mini Hooks (max. load 4kg)
2 x end caps
18 x clips
18 x screws
18 x plugs
3 x corner connectors
On which wall types can I install an Artiteq Click Rail?
Artiteq rails can be installed on almost all wall types. On concrete and brick walls, the rail can be installed with the provided plugs. On timber walls, the rail can be installed just with the screws. On plaster walls, the rail can be installed with special plugs for plaster walls (included in the installation kit). Installation on glass wall is not possible.
How to drill holes in order to fasten the clips when mounting Artiteq Click Rail to a ceiling?
You can mark out the holes by using the Click&Connect feature as a template. The clips are designed in such way that the screws can be inserted diagonally up to a 10° angle, after which the rail can be mounted to the ceiling. If this angle is too small or if you would like to drill at a straighter angle, we recommend that you use a longer drill or a special drill with a compact head.
What is the best way to install the Click Rail system perfectly level?
Mark the wall on both ends with a small dot about one inch from the ceiling. If your wall and ceiling are completely smooth, flat and level, it is also possible to use a wooden strip of about two inches wide. Simply hold it to the ceiling and mark a short line underneath along the wall at every 10 to 16 inches. The brass clips, screws and fasteners can now be installed on this line. When the rail is mounted, the pencil marks will no longer be visible.