Artiteq Micro Grip Hook SLIMLINE

Artiteq Micro Grip Hook SLIMLINE

Micro Grip is an adjustable hook that can be used to hang frames/panels onto a suspension system on a wall. The mechanism is self-clamping meaning that clamping increases in force with higher loads. Unlocking the clamping mechanism allows the Micro Grip to be vertically adjusted on the wire.

Micro Grip hook represents the newest generation of hooks. A high-quality plastic reinforced with fibreglass was chosen for this hook, leading to a 70% reduction in the use of materials compared with previous generations of Artiteq hooks. In addition to the ecological advantages, the hook is extremely lightweight as a result and very easy to use. Artiteq Micro-Grip hooks are strong and ergonomically designed.

Maximum weight

Artiteq Micro Grip Slimline can hold up to 5kg of weight on a Twister Perlon Wire SLIMLINE and 10kg on a Twister Steel Wire SLIMLINE. This Artiteq Micro Grip Hook can be used with SLIMLINE perlon or steel wires ONLY.

Hanging pictures using Micro Grip

A frame or panel of your picture can be hung from one or two wires. Either one centrally placed Micro Grip behind the frame or two Micro Grip hooks, one on each side (both an equal distance from the middle of the frame). Frames are more stable when hanging from two wires (particularly large frames). The wires must be leveled vertically.

Fitting a Micro Grip to a wire

■ Use a Micro Grip with Artiteq 2mm wires or rods only.
■ Pinch the control button and the hook’s housing together.
■ Insert a wire from the top of Micro Grip until approximately 5cm of wire protrudes under the hook.

Setting a Micro Grip to the correct height

■ Always leave at least 5cm of wire protruding below the hook.
■ When making adjustments, remove the frame or support it the way there is no weight hanging on the Micro Grip.
■ Never press the control button if there is weight hanging on the Micro Grip.
■ Pinch the control button and the hook’s housing together.
■ Slide the hook to the height you need.

Hanging a frame/panel to the Micro Grip

■ Hang the frame on a Micro Grip using D-rings or a wire on the back of the frame.
■ Do not use any sharp objects to fasten the frame to a Micro Grip.

10 year warranty

Artiteq offers a 10-year warranty on the Micro Grip and the Artiteq wires to which they are fitted. In case of damage or wear and tear resulting from normal use during this period, Artiteq will replace the product at no extra cost. If a product is no longer available, it will be replaced with an equivalent product. Please contact the Picture Superstore UK if you have any queries at hello@picturesuperstore.co.uk.