ARTITEQ Micro Grip Lock Hook max. 20kg 10pcs

Artiteq Micro Grip Lock Hook 10pcs

Artiteq Micro Grip Lock Hook is an adjustable hook that can be used to hang frames/panels onto a suspension system on a wall. The mechanism is self-clamping meaning that clamping increases in force with higher loads. Unlocking the clamping mechanism allows the Micro Grip to be vertically adjusted on the wire.

Micro Grip hook represents the newest generation of hooks. A high-quality plastic reinforced with fibreglass was chosen for this hook, leading to a 70% reduction in the use of materials compared with previous generations of ARTITEQ hooks. In addition to the ecological advantages, the hook is extremely lightweight as a result and very easy to use. Artiteq Micro Grip hooks are strong and ergonomically designed.

Maximum load

Artiteq Micro Grip Lock Hook can be used with any perlon or steel wires.

Two hook models

At the Picture Superstore UK we offer 2 Micro Grip models: Micro Grip and Micro Grip Lock Hook. For Micro Grip and Micro Grip Lock, all Twister, Twister Cliq2Fix and Solid Slider hanging wires can be used.

Hanging pictures using Artiteq Micro Grip Look Hook 20kg (10pcs)

A frame or panel of your picture can be hung from one or two wires. Either one centrally placed Micro Grip behind the frame or two Micro Grip hooks, one on each side (both an equal distance from the middle of the frame). Frames are more stable when hanging from two wires (particularly large frames). The wires must be levelled vertically.

Fitting a Micro Grip to a wire

■ Use a Micro Grip with Artiteq 2mm wires or rods only.
■ Pinch the control button and the hook’s housing together.
■ Insert a wire from the top of Micro Grip until approximately 5cm of wire protrudes under the hook.

Setting a Micro Grip to the correct height

■ Always leave at least 5cm of wire protruding below the hook.
■ When making adjustments, remove the frame or support it the way there is no weight hanging on the Micro Grip.
■ Never press the control button if there is weight hanging on the Micro Grip.
■ Pinch the control button and the hook’s housing together.
■ Slide the hook to the height you need.

Hanging a frame/panel to the Micro Grip

■ Hang the frame on a Micro Grip using D-rings or a wire on the back of the frame.
■ Do not use any sharp objects to fasten the frame to a Micro Grip.
■ Use wires with a max. thickness of 1 mm for Micro Grip Slimline, 2mm for Micro Grip and Micro Grip Lock.

10 year warranty

Artiteq offers a 10 year warranty on the Micro Grip and the Artiteq wires to which they are fitted. In case of damage/ wear and tear resulting from normal use during this period, Artiteq will replace the product at no extra cost. If a product is no longer available, it will be replaced with an equivalent product. Please contact us at the Picture Superstore UK if you have any queries at hello@picturesuperstore.co.uk.

Compatible Wires and Rods

Artiteq Micro Grip 2mm can be used in with all Artiteq wires and rods listed below:

■ Twister Perlon
■ Twister Steelwire
■ Twister Perlon Cliq2Fix
■ Perlon Solid Slider
■ Steel Solid Slider
■ Perlon Slider
■ Perlon with Loop
■ Steel Suspension Rod

Brand	ARTITEQ®
Capacity	20kg
Warranty	10 years