Adhesive Hanger
The Adhesive Hanger is a self-adhesive plate made of galvanised steel. It is attached to the back of a forex or plexiglass panel for hanging. It is an accessory behind a panel. Depending on the weight of the panel, it is determined which size of hanger to use. Two hangers may need to be used depending on the size of the panel and its weight.
What’s in the box
1 x Adhesive Hanger – 100mm 100mm max. 4kg
2 x Clear Bumper
How to use
These self-adhesive hangers are suitable to help hang various flat panels, including foam boards, photo blocks, glass, mirrors, plexiglass and acrylic frames. They are used where you cannot screw a traditional picture frame hook onto the back of the panel.
The unique self-adhesive strips (on the back of the hook) provide good strength up to the maximum capacity shown above. Please always clean the panel surface before you stick it on. Before hanging, test the strength of the adhesion by pulling firmly on the panel.
How to install
Before using the hanger, it is important to follow the steps below:
Step 1: Make sure that the place where the hanger will be placed on the panel is free of grease (after cleaning the panel, allow the area to dry)
Step 2: Stick the hanger on the just degreased spot on the back of the panel
Step 3: Place a weight on the hanger and let it rest for 72 hours
